Epoxy Flooring Kit 3 Gallon Clear Superior Flow

ANE-SUPERIOR FLOWis a high-performance, 100% solids epoxy floor coating designed to deliver exceptional results as both a primer and base coat.

For best results when installing Metallic Floors or One-Color Floor Systems, 60-150 square feet per 3-gallon kit.Engineered for superior flow and self-leveling application, it offers outstanding adhesion to concrete, high chemical and abrasion resistance, and a fast-curing, low-VOC formula, making it a reliable choice for demanding environments. Its low viscosity ensures smooth, seamless surfaces, making it ideal for metallic epoxy systems, decorative flake floors, high-traffic commercial spaces, and chemical-resistant industrial flooring. Packaged in 3-gallon kits with a 2:1 mix ratio, ANE-SUPERIOR FLOW provides consistent coverage of 50-150 ft2 per gallon at 10-32 mils thickness, setting the standard for durability and ease of use in professional-grade floor coatings.

CURE TIMES:Temperature: 75 F Humidity: 50% RH Pot Life: 20 minutes Dry to Touch: 5-6 hours Light Foot Traffic: 16 hours Heavy Traffic: 3 days Full Cure: 7 days Maximum Recoat: 4 days.

SURFACE PREPARATION:For optimal application of ANE-SUPERIOR FLOW surface preparation is essential. The surface must be clean, dry, and free from any substances that could impede bonding. The moisture content in the concrete should be below 6%. Its recommended to conduct vapor testing using ASTM F2170, ensuring the concrete is below 85% RH, or below 3lb/24hr/1000 sq. ft. If moisture re-vapor transmission exceeds these levels, it is advised to use ANE-SUPERIOR FLOW before application. The surface should be prepared to a Concrete Surface Profile (CSP) of Level 2-3, as defined by the International Concrete Repair Institute (ICRI). Use methods such as diamond grinding or shot blasting to achieve this surface profile. Ensure that new concrete surfaces have been cured for at least 28 days prior to application.

APPLICATIONS GUIDELINE:Condition for ANE-SUPERIOR FLOW at 65F to 85F for optimal performance. If adding color, mix it into Part A before combining with Part B. Pre-mix Part A for one minute if they are liquid colors, and two-three minutes if they are powder colors to make sure, they break up inside and then blend the components at a 2:1 ratio together. Use a low-speed drill for mixing, scraping the sides and bottom of the container to ensure uniformity. Thin the product with acetone or xylene, if necessary, but apply thinly for effective solvent evaporation. Work quickly after mixing, as the epoxy will start to generate heat and begin to cure inside the pail. Mix only as much material as can be used within the working time to prevent waste. To apply, immediately pour ANE-SUPERIOR FLOW into a 12- to 18-inch-wide bead on the floor. Evenly spread the material using a notched squeegee at the desired thickness. Have a second person back-roll with a 3/8 shed-resistant woven roller to distribute the product evenly and avoid application lines. Avoid back-rolling once the product starts to tack up to maintain its self-leveling properties. Use a new mixing pail for each batch to preserve the mixtures quality. Apply with steady, consistent pressure for an even finish. Ensure good ventilation during application and curing for optimal results and safety.

LIMITATIONS

• Do not apply at temperatures below 40F or above 95F.
• Avoid prolonged storage of mixed products in the bucket to prevent overheating and spoilage.
• Do not use on concrete with Moisture Vapor Emissions exceeding 3lbs/24hr/1000 sq. ft.
• Suitable for interior use only, unless covered by a UV-resistant pigmented coating for exterior applications.
• Application should be avoided if humidity exceeds 85%, if the temperature is less than 5 above the dew point, or if rain is expected within 24 hours.
• The concrete substrate must be cured for a minimum of 28 days.
• If solvents are used for thinning, the product becomes combustible or flammable; avoid sparks or open flames.
• The shelf life of ANE-SUPERIOR FLOW is 1 year from the date of manufacture.
• It is recommended to use angular slip-resistant aggregate in coatings or flooring systems for wet, oily, or greasy conditions. Safety and compliance with current standards are the responsibility of the contractor and end user.
• Be aware that moving joints and shrinkage cracks in the concrete may reflect through the finished flooring system.
• Tire marking may occur depending on usage.
• For professional use only

CLEAN UP AND DISPOSAL:Its important to immediately clean all mixing and application equipment after use. To effectively remove any uncured material, use solvents acetone, or xylene. Always follow the safety instructions of the solvent manufacturer. If the product has already been cured, it can only be removed mechanically. Remember to dispose of all containers, whether they are empty or contain residues, in accordance with local, state, and federal environmental regulations. In case of skin contact with ANE-SUPERIOR FLOW, thoroughly wash the affected area with warm soapy water to ensure proper cleaning.