Description:
Description: Get acquainted with the amazing FR2060 non-contact phase detector that marks a revolutionary leap from traditional phase order detection methods. Traditionally, testing the phase order demanded removing the three-phase wire terminal and connecting the test pins to the exposed live wires. However, FR2060 counters this approach by embracing the non-contact inductive measurement with its unique clamp-shaped design. With FR2060, dodge the hassle of wire removal and the risk of touching high-voltage live wires. You just have to clip the three ultra-inductive high-insulation clamps to the insulation skins of the three-phase live wires for phase detection. Sound and light signals will tell you about the positive or negative state of the phase order in three-phase power supply. But that’s not all! Apart from regular phase detection, the FR2060 brims with features such as live line inspection, simple power inspection, open circuit search, break point positioning, and line maintenance. The FR2060 guarantees rapid and convenient detection with a crystal clear display resulting in heightened field testing safety and increased productivity! Bottom line – it’s an all-rounder safety instrument for three-phase power supply phase order, motor detection, and line maintenance! Specification:Function: FR2060 offers phase detection including normal and reverse phase, live line inspection, simple electricity inspection, phase loss judgement, circuit breaker search, break point location, and line maintenance. Power: Powered by a 9V battery, FR2060 provides up to 70 hours of continual usage time. Measure Mode: Non-contact clipping makes the measurement mode convenient and safe. Wire Position: The wire to be measured should be in the center of the jaw. Frequency: The device can automatically identify 50Hz/60Hz frequency. Live Electricity Range: FR2060 can detect a range from AC70~1000V, 45/65Hz (Sine wave continuous input). Additionally, conducted electrostatic detection is available. Maximum Voltage Measuring Capacity: The device can measure up to AC1000V. Clamp Wire Size: The clamp can fit wires with an outside diameter from 1.5mm to 48mm. Display: FR2060 offers an array of display settings for positive phase, reverse phase, live electricity, lack of phase, and open circuit. Sounds: FR2060 emits different sounds for positive and reverse phase. Battery Check: A power indicator is present; the LOW BATTERY lamp indicates when the battery is low. Clamp Drop Lead Length: 0.6m Device Size: FR2060 measures in at L 117.6mmW 81mmT 25mm. Automatic Shut-off: The device automatically turns off after approximately 6 minutes of inactivity to extend battery life. Battery Voltage: When the battery voltage drops to roughly 5.2V, a low battery voltage symbol will be shown as a reminder to replace the battery. Device Weight: FR2060 weighs around 260g including the battery. Maximum Rated Power: The device reaches a maximum rated power of 300mVA. Working Temperature and Humidity: This detector operates best in temperatures ranging from -10 to 55 and humidity levels below 80%rh. Storage Temperature and Humidity: The device can be safely stored in temperatures ranging from -20 to 60 and humidity levels below 90%rh. Insulation Resistance: The device has an insulation strength of 3.7kVrms. Compliance with Safety Regulations: FR2060 is designed according to the EN61010-1:2001, EN61010-031:2002 safety standards. Package Includes: FR2060 Meter, Instrument package, User Manual. Check out the detailed pictures of the FR2060 Meter below:
(0 ) Reviews:
No reviews yet. Be the first to review!